Продам Eye-One Pro в Москве
Продам Eye-One Pro в Москве
Полный комплект (нет только картонной коробки-обертки)
General Information
Date and Time: 02.03.2011 17:45:00
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3
Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 313821
Firmware version: 503
CPLD version: 999
Dark measurement count: 3149
Lamp burning time: 11218.9 seconds
Spot measurement count: 2571
Scan measurement count: 602
Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed
Button Test
Button is working normally
Calibration
Emission calibration: Successful
Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass
Dark measurement
Dark measurement: Pass
Noise Measurement
Noise measurement: Pass
Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass
*** PASS ***
**************************
General Information
Date and Time: 02.03.2011 17:45:00
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3
Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 313821
Firmware version: 503
CPLD version: 999
Dark measurement count: 3149
Lamp burning time: 11218.9 seconds
Spot measurement count: 2571
Scan measurement count: 602
Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed
Button Test
Button is working normally
Calibration
Emission calibration: Successful
Emission Test
White measurement: Successful (X=85.417 Y=95.338 Z=74.263)
Gray measurement: Successful (X=32.515 Y=35.773 Z=33.481)
Black measurement: Successful (X=0.150 Y=0.161 Z=0.169)
Red measurement: Successful (X=40.431 Y=21.161 Z=0.983)
Green measurement: Successful (X=33.521 Y=67.564 Z=9.629)
Blue measurement: Successful (X=11.660 Y=6.831 Z=63.777)
Emission Test: Pass
Dark measurement
Dark measurement: Pass (-194.367)
Noise Measurement
Noise measurement: Pass (2.829)
Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=11219.6 seconds, CIT=0.01197 seconds, LIT=0.0128016 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.832 a=-0.402 b=2.589)
Measurement 2: Successful (L=95.816 a=-0.410 b=2.603)
Measurement 3: Successful (L=95.802 a=-0.407 b=2.604)
Measurement 4: Successful (L=95.785 a=-0.403 b=2.613)
Measurement 5: Successful (L=95.786 a=-0.411 b=2.609)
Measurement 6: Successful (L=95.779 a=-0.415 b=2.625)
Measurement 7: Successful (L=95.773 a=-0.403 b=2.609)
Measurement 8: Successful (L=95.769 a=-0.402 b=2.619)
Measurement 9: Successful (L=95.768 a=-0.406 b=2.630)
Measurement 10: Successful (L=95.772 a=-0.407 b=2.625)
Reflectance drift test: Pass (0.021)
*** PASS ***
General Information
Date and Time: 02.03.2011 17:45:00
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3
Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 313821
Firmware version: 503
CPLD version: 999
Dark measurement count: 3149
Lamp burning time: 11218.9 seconds
Spot measurement count: 2571
Scan measurement count: 602
Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed
Button Test
Button is working normally
Calibration
Emission calibration: Successful
Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass
Dark measurement
Dark measurement: Pass
Noise Measurement
Noise measurement: Pass
Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass
*** PASS ***
**************************
General Information
Date and Time: 02.03.2011 17:45:00
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3
Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 313821
Firmware version: 503
CPLD version: 999
Dark measurement count: 3149
Lamp burning time: 11218.9 seconds
Spot measurement count: 2571
Scan measurement count: 602
Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed
Button Test
Button is working normally
Calibration
Emission calibration: Successful
Emission Test
White measurement: Successful (X=85.417 Y=95.338 Z=74.263)
Gray measurement: Successful (X=32.515 Y=35.773 Z=33.481)
Black measurement: Successful (X=0.150 Y=0.161 Z=0.169)
Red measurement: Successful (X=40.431 Y=21.161 Z=0.983)
Green measurement: Successful (X=33.521 Y=67.564 Z=9.629)
Blue measurement: Successful (X=11.660 Y=6.831 Z=63.777)
Emission Test: Pass
Dark measurement
Dark measurement: Pass (-194.367)
Noise Measurement
Noise measurement: Pass (2.829)
Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=11219.6 seconds, CIT=0.01197 seconds, LIT=0.0128016 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.832 a=-0.402 b=2.589)
Measurement 2: Successful (L=95.816 a=-0.410 b=2.603)
Measurement 3: Successful (L=95.802 a=-0.407 b=2.604)
Measurement 4: Successful (L=95.785 a=-0.403 b=2.613)
Measurement 5: Successful (L=95.786 a=-0.411 b=2.609)
Measurement 6: Successful (L=95.779 a=-0.415 b=2.625)
Measurement 7: Successful (L=95.773 a=-0.403 b=2.609)
Measurement 8: Successful (L=95.769 a=-0.402 b=2.619)
Measurement 9: Successful (L=95.768 a=-0.406 b=2.630)
Measurement 10: Successful (L=95.772 a=-0.407 b=2.625)
Reflectance drift test: Pass (0.021)
*** PASS ***
- Вложения
-
- ST831121.JPG
- (3.1 МБ) 2004 скачивания
-
- ST831122.JPG
- (3.08 МБ) 2004 скачивания
-
- ST831123.JPG
- (2.95 МБ) 2004 скачивания
-
- ST831124.JPG
- (3.13 МБ) 2004 скачивания
spectrof писал(а): (→)В районе 25 тысяч
(в нагрузку дам PM 5.0.10 и покажу как работать, если требуется)
Если не продали, зарезервируйте. Можно встретиться сегодня. Как с Вами связаться?
ardip@yandex.ru
Цена девайса 20 тысяч рублей
P.S. на вышеуказанный телефон звонить бесполезно, оставляйте контакты - сам выйду на связь
P.S. на вышеуказанный телефон звонить бесполезно, оставляйте контакты - сам выйду на связь
Вернуться в «Продажа б/у спектрофотометров»
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 2 гостя